[V8] Anyone parting out a V8 in the Midwest?

[Coleman, David]

I replaced a headlight support (and rad support) with the bumper off.
Exact recollection is a bit hazy, but I doubt it could be easily done w/
the bumper still attached.  The bumper's easy enough to remove anyway,
and will make any paintwork/labor charges less if you do it first
anyway.  And you're less likely to lose the bolts.

Are you referring to the side repeater light, the corner light next to
the headlight, or the bumper light?  The corner light is a breeze and
bumper or headlight has no effect; its held in by a plastic tab and a
single screw accessible next to its socket.  The bumper lights are also
easy; 1/2 turn to remove the turn signal socket, and a pull-apart deal
for the fogs.  Easier to access w/ bumper pulled away, but no need to
reconnect before installing the bumper after everything's fixed up.

-DaveC.



> -----Original Message-----
> From: v8-bounces at audifans.com 
> [mailto:v8-bounces at audifans.com] On Behalf Of Korn, Bob
> Sent: Wednesday, November 09, 2005 10:00 AM
> To: v8
> Subject: Re: [V8] Anyone parting out a V8 in the Midwest?
> 
> Tore into the beast last night.  Got the hood open without 
> much struggle, thankfully!  Should be able to beat and bend 
> back to a reasonable shape to get it closed up so I can at 
> least drive to the body shop.  I did spend some time in a 
> body shop during my youth so am familiar with the fine art of 
> beating out a panel!  I don't see any damage to the radiator 
> and light assy supports, however need to tear down a little 
> further to confirm.  I looked at the manual and in its 
> cryptic manner it appears that the bumper needs to come off 
> to get to the light assembly.  Can someone confirm this?  I 
> also assume that the side marker light removal will become 
> obvious when the bumper is removed?  Now I'm thinking about 
> the Euro's.......................already have a huge pile of 
> parts to put on
> this beast, however, what an opportunity!   Are they still running
> around $300?  Any reliable current sources any one can recommend?
> Thanks,
> 
> Bob
> 90 V8 Pearl in need of some TLC.
> 
> -----Original Message-----
> From: Korn, Bob
> Sent: Tuesday, November 08, 2005 12:47 PM
> To: v8
> Subject: Anyone parting out a V8 in the midwest?
> 
> Had a little unintended contact with a Ford truck this 
> morning, need a hood and a  drivers side head light assembly 
> at a minimum, anyone parting out any V8's in the central US?  
> I'm in the Kansas City area.  
> TIA,
> 
> Bob
> 90 Pearl V8 
> 
> 
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: 
> http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB 
> ... all contributions welcome!
> 

THE INFORMATION CONTAINED IN THIS MESSAGE AND ANY ATTACHMENT MAY BE PRIVILEGED, CONFIDENTIAL, PROPRIETARY OR OTHERWISE PROTECTED FROM DISCLOSURE. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, copying or use of this message and any attachment is strictly prohibited. If you have received this message in error, please notify us immediately by replying to the message and permanently delete it from your computer and destroy any printout thereof.