[V8] TB tools not complete

[Kneale Brownson]

The 2587 is helpful in adjusting the ecentric on the roller that tensions
the timing belt, but it could be replaced with a pin spanner that has pins
small enough to fit into the holes in the roller or something shop-made to
fit.  The 3211 is a helpful holder of the vibration damper that eliminates
the need to keep checking that it hasn't moved while you're tightening the
cam sprocket bolts.  But the process can be done without it as long as you
keep checking. The 3203 is not necessary.  Easily replaced with a seal
puller like this:  http://www.thetoolwarehouse.net/shop/LIS-56750.html
I got mine at Sears for under $10.


At 10:50 PM 10/4/2005 -0600, John Dodd wrote:
>The set of tools from Chris arrived today.
>Unfortunately he did not send these :
>2587 , 3203 and 3211 which are called for in the procedure.
>How big a deal is this since I'm doing for the first time ?
>I wished I'd asked before to make sure I get a complete set.
>Thanks
>John
>_______________________________________________
>Audifans V8 mailing list
>Send posts to: mailto:V8 at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>Have an Audi V8 question?  Check the Audifans Knowledgebase!
>http://www.audifans.com/twiki/bin/view/Audi/V8
>Have a V8 answer? ... Please help others by adding to the KB ... all 
>contributions welcome!