[V8] Timing Belt Saga 4.5

[Tony and Lillie]

Kneale,
Also, the screws will leave a mark where they were. Don't clean the TPS or 
rub it too much. That way, the marks will still be there.

Tony Hoffman
----- Original Message ----- 
From: "Jeremy Ward" <jward.v8 at gmail.com>
To: "'Kneale Brownson'" <kneale at coslink.net>; <v8 at audifans.com>
Sent: Wednesday, October 05, 2005 5:40 PM
Subject: Re: [V8] Timing Belt Saga 4.5


> The TPS (throttle position sensor) is held in place by 2 phillips screws.
> Just remove them and swing the TPS off the end of the accelerator shaft 
> and
> out of the way.  Note that it is adjustable via these 2 screws (loosen 
> them
> slightly and rotate it cw / ccw as needed).  Make sure to put it back 
> pretty
> much where you removed it from (the picture you took should help).
>
> Cheers,
>
> - Jeremy
>