[V8] help! need photos of door lock mechanism
John Bysinger
john at bysinger.net
Wed Oct 19 20:28:05 EDT 2005
Thanks to everyone for their help, the air tank I had did the trick, just
blew some air into the green line in the trunk and was in. Now to order
some parts to fix the doors... The tips below should help out with that :)
You guys always come through in a pinch, I hope to return the favor someday!
:)
-John
'90v8q
-----Original Message-----
From: Etdmail at cs.com [mailto:Etdmail at cs.com]
Sent: Wednesday, October 19, 2005 11:24 AM
To: john at bysinger.net
Cc: v8 at audifans.com
Subject: Re: [V8] help! need photos of door lock mechanism
Hi all
John,
Ever wonder if other enthusiast-sites ever require this thread?
I had similar problems with a Porsche, that use to lock its keys
in the car, if you ever shut the door with the keys still in it!
Guess it's bound to happen if you drive a v8Q long enough
without the lock 'updated' bits installed.
The wedge and coat hanger approach is the procedure
the 'pros' would likely use to get your V8Q open. The
vacuum approach - sounds the best if you have one of
the portable hand pumps at your disposal.
If you are going to attempt the fix your self you should
find pics and procedure outlines one these sites.
<A HREF="http://members.aol.com/c1j1miller/body.html#Door%20Lock%20Repair
">
http://members.aol.com/c1j1miller/body.html#Door%20Lock%20Repair</A>
<A HREF="
http://www.ohlemacher.com/German%20Cars/audi/door_handle_removal.htm">http:/
/www.ohlemacher.com/German%20Cars/audi/door_handle_removal.htm</A>
<A HREF="http://carstereohelp.com/stereoremovalAudiV8FrtDr.htm">
http://carstereohelp.com/stereoremovalAudiV8FrtDr.htm</A>
<A HREF="http://www.the12volt.com/doorlocks/page3.asp#vac">
http://www.the12volt.com/doorlocks/page3.asp#vac</A>
The inner and outer door shells come apart making accesses
to the lock parts easier .. Small compensation I know ...
I'm attaching the exploded view form the v8Q manual.
Good Luck,
Best,
Ed
-
More information about the V8
mailing list