[V8] Flickering Lights Voltage Regulator

[Buchholz, Steven]

... I'd seriously doubt the HVAC controller has the bandwidth to show
the variation ... in fact I'd doubt you'd see it on a DVM.  If the
frequency is low enough I'd recommend an analog voltmeter ... or an
oscilloscope to try to look for the variation ... 

Steve B
San Jose, CA (USA)
> 
> Hold the outside temp button press the OFF button then use the temp
up/down
> buttons to go to Ch 11 and press the outside temp buttong again (I
think).
>   Mine reads a nice steady 13.8 to 14.2.
>  Ed
> 
>  On 10/20/05, Bill Hitzler <bhitzler at kpbsd.k12.ak.us> wrote:
> >
> > I don't recall offhand but there's an easy way to get the voltage
readout
> > for the charging system to display on the climate control. Watching
the
> > display for fluctuations may get you closer to the actual problem.
How
> > about folks, anyone remember how to pull up that display? Good Luck,
Bill