[V8] pentosin level/flickering light

[Kneale Brownson]

There are marks for minimum and full levels on the engine side of the tank.
 If you remove the air horn on that side and shine a good light on it,
you'll see the mark.  The midpoint between the marks is about 3.5 inches up
from the bottom of the tank.  You also can use the plunger attached to the
cap as a "dipstick".  I generally keep my v8s at a mark I put on the front
of the tank with a marker pen that is about at the midpoint.


At 01:15 PM 10/27/2005 -0600, John Dodd wrote:
>1. Does anyone know the proper level for the hydraulic fluid ?
>I cannot see a mark on the tank.If you do please let me know by  saying
>x inches from bottom or top.
>2. When coming to a stop the warning red light starts to flicker.I
>assume it's related to my Pentosin being at a low level.(or bomb ?)
>Only happens once in a while.
>Thanks
>John
>_______________________________________________
>Audifans V8 mailing list
>Send posts to: mailto:V8 at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>Have an Audi V8 question?  Check the Audifans Knowledgebase!
>http://www.audifans.com/twiki/bin/view/Audi/V8
>Have a V8 answer? ... Please help others by adding to the KB ... all 
>contributions welcome!