[V8] Spark plug torque

[cobram at juno.com]

Misinformation!  The hole is too narrow to allow snapping, the correct
procedure is torque until it strips, then carefully remove socket.

To original poster: Don't forget the anti-seize, a little dab will do ya.

BCNU,
http://www.geocities.com/cobramsri/
There are two types of tragedies in life. One is not getting what you
want, the other is getting it.

"Coleman, David" <David.Coleman at blackrock.com> writes:
> My rule of thumb is to tighten until it snaps, then back off a
> quarter-turn.
> 
> -dc-