[V8] KD, KF recalls

Ingo Rautenberg i.rautenberg at waratap.com
Thu Apr 27 16:07:16 EDT 2006


OTOH, if you prefer not to have an explosive device in front of you,  
you COULD disconnect the airbag and replace it with a sport steering  
wheel and remove the airbag warning light bulb from the cluster.   
Might be a bit more problematic in the 92+ cars with passenger  
airbags, but I THINK some of us have done so on the '90/ '91 V8's.  I  
know I have :~)

Ingo

On Apr 27, 2006, at 3:16 PM, dsaad at icehouse.net wrote:

> The Air Bag Module is located under the radio/climate control stuff  
> in the
> center console. If I remember, you need to remove the whole center  
> console to
> replace it. Not exactly a simple job, but a reasonably alert chimp  
> should be
> able to complete it successfully. If you wanted to make sure to get  
> it done
> correctly and on time, show up with the center console removed for  
> them. You
> could also verify part numbers and such before you go there.
>
> Dave
>
>
>
> Quoting Mike Arman <Armanmik at earthlink.net>:
>
>>
>>
>> Got a recall notice today for the KD and KF recalls, cruise  
>> grommet and
>> airbag sensor.
>>
>> Called AoA (mostly to see if they knew anything about this) and  
>> got the
>> stock reply "Only the dealer can perform this work."
>>
>> Asked what parts were involved "Don't know, we're not technicians."
>>
>> Asked if I could buy the parts from them and install them myself  
>> "only
>> the dealer etc."
>>
>> Asked if any of the local dealers had ever even SEEN a 1990 V8Q,  
>> answer
>> "umm, err, duh . . . "
>>
>> Stated that I had no intention of ever letting any dealer so much as
>> touch this car under any circumstances whatsoever, I know more about
>> this car than they do, why should I let them work on it even for  
>> free?
>>
>>
>> I do know what the cruise grommet callback is - change one rubber
>> grommet on the cruise control rod (making sure not to drop any  
>> hardware
>> into the air inlet in the process).
>>
>> Which module for the air bag has to be checked/replaced or whatever -
>> and what happens if it is not done? (I can just see the local - 65  
>> miles
>> away - dealer trying to find the correct modules, tearing things  
>> open to
>> look around for them, and then trying to get this car all back  
>> together
>> again correctly - rotsa ruck, not on my car they won't.)
>>
>>
>>
>>
>> Best Regards,
>>
>> Mike Arman
>>
>> V8Q, and they ain't touching it.
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> Audifans V8 mailing list
>> Send posts to: mailto:V8 at audifans.com
>> Manage your list connection: http://www.audifans.com/mailman/ 
>> listinfo/v8
>> Have an Audi V8 question?  Check the Audifans Knowledgebase!
>> http://www.audifans.com/twiki/bin/view/Audi/V8
>> Have a V8 answer? ... Please help others by adding to the KB ... all
>> contributions welcome!
>>
>
>
>
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/ 
> listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ...  
> all contributions welcome!



More information about the V8 mailing list