[V8] O2 R&R

[Buchholz, Steven]

... on the MT cars it isn't *that* difficult to remove the crossover
wholesale ... I suspect the ATs to be similar.  I bet the problem will
be a bit easier to solve with the thing on a bench ... 

Good luck!
Steve B
San Jose, CA (USA)

... drove #344 in to work today ... was having clutch pedal issues, new
M/C fixed everything back up.  Little by little the car is getting back
into shape!
> 
> Well it has gotten the better of me.  Bought a nice very long box end
wrench
> of the proper size and preheated and further PB blasted the site.  No
> effect, put on the wrench and applied torque with a nice jack and
lifted the
> car 1.5 inches up in its suspension travel and no budging! (in either
> direction) I'm taking it to the pros for a radiator flush tomorrow and
see
> if they can have at it.  I would not be surprised to see it cut off
and  new
> bung welded on as the most efficient means of R&R, especially if these
tools
> are at your disposal.