[V8] Hot cams

[quattro + 5 or 8 = fun]

Sorry all-

I have been off the net for a few days so I am catching up on this thread.
But, one concern I have is that my cam loves are re-hardened.  Some years
ago, I called crane and they told me they DO NOT re-harden the lobes.  This
concerned me a bit as I do not want to spend all that $$$ and have flat
spotted cams in a couple of years.  Does anyone know if they DO harden the
cams when the regrind is complete?


Shayne


PARTING:  1972 Mercedes Benz 280 SE 4.5
PARTING:  1986 Audi 4000 CS quattro


> From: Ron Wainwright <ron_01056 at yahoo.com>
> Date: Wed, 29 Nov 2006 13:13:11 -0800 (PST)
> To: <V8 at audifans.com>
> Subject: Re: [V8] Hot cams
> 
> 
> Scott traditionally upgraded cams costy 3 times the
> $500 quoted! I don't know bout anyone else....but I
> would like to find out all the info 1st. I should be
> getting the cam specs in a day or so. Then I can give
> Mike the #'s & see what can be done at Crane.
> 
>  I don't wanna pay $500 for a mild upgrade..when you
> can get a mild upgrade for FREE by tweeking the stock
> cams 4Deg.
> 
>  & Marky Mark said that all Keith did was drop the
> cams in the car..nothing else was needed! So
> again..lets get all the info & go from there.