[V8] Hood wiring

[Audi Sport]

Wouldn't it be easier to use the 200 washers? Or are they of a different shape?
 
Dan



> Date: Wed, 6 Dec 2006 19:46:52 -0500> To: v8 at audifans.com> From: kneale at coslink.net> Subject: [V8] Hood wiring> > The V8 hood has separate wires to and from the windshield washer nozzle> heaters. > > I have a V8 hood on my 200q20v Avant. The 200 had a single circuit for the> nozzle heaters. They're all listed in the Bentley/V8 service manuals as> 0.5 wires, although the ones on the V8 hood seem more robust than the one> from the 200. Can I lump the two V8 wires with the single wire from the> 200 to keep the heaters active?> > The V8 hood has three ground wires, a smaller from the underhood light and> two 0.5s from the nozzles (I presume). Should I run those all to a good> ground on the body? The 200 uses only one tiny ground wire for both the> light and the nozzles.> _______________________________________________> Audifans V8 mailing list> Send posts to: mailto:V8 at audifans.com> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8> Have an Audi V8 question? Check the Audifans Knowledgebase!> http://www.audifans.com/twiki/bin/view/Audi/V8> Have a V8 answer? ... Please help others by adding to the KB ... all contributions welcome!