[V8] '93 Picture

[Dave Head]

Did you just do the oil ring seal, or did you also remove the 
distributor mount with the 2 torx screws and do the flat seal for it...

Paul Jager wrote:

>Here's a shot of my'93V8 taken today (115KB)....
>
>http://www.jageng.com/Images/AudiV8_Moving.jpg
>
>I think I've had it about 6 years and it runs & looks better than ever.
>Everything works, put in a sub chamber for deep bass, using our spare well
>sealing system (just like on our 928 Audio).
>
>I still am living with an oil leak off the back, driver side of the engine.
>I did a 1000 mile trip and used a quart over the distance. Consumption of
>oil is not the issue, just the smoking 5 minutes after initial start, or on
>stopping after a few hours on the highway (burns off the cats after loss of
>cooling air flow across the cats.) Embarrassing!
>
>We did the distributor seals and o-rings. I still suspect the head gasket at
>the corner. A barely noticeable coolant leak was in the same region, leak
>stopper fixed that.  I might get a dye kit and use mirrors to trace.
>
>Paul
>www.jageng.com
>
>
>
>
>
>_______________________________________________
>Audifans V8 mailing list
>Send posts to: mailto:V8 at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>Have an Audi V8 question?  Check the Audifans Knowledgebase!
>http://www.audifans.com/twiki/bin/view/Audi/V8
>Have a V8 answer? ... Please help others by adding to the KB ... all contributions welcome!
>
>
>  
>