[V8] Oxygen sensor -plug

[Jeremy Ward]

http://www.myv8q.com/pics/RPM-Sensor-Conector(Bottom).jpg

The green wire is the added 4th wire for ground to the engine block ;-)

-----Original Message-----
From: v8-bounces at audifans.com [mailto:v8-bounces at audifans.com] On Behalf Of
Coleman, David
Sent: Thursday, February 23, 2006 3:23 PM
To: ekellock at gmail.com; john.dodd at sait.ca
Cc: v8 at audifans.com
Subject: Re: [V8] Oxygen sensor -plug

There's the two-prong connection and the third signal wire, which splits off
just before there. You probably need to remove the airbox in order to reach
under there, under the distributor and over the tie rod. 




--------------------------
David A. Coleman
BlackRock
Sent via BlackBerry Wireless


-----Original Message-----
From: v8-bounces at audifans.com
To: John Dodd
CC: v8 at audifans.com
Sent: Thu Feb 23 18:14:43 2006
Subject: Re: [V8] Oxygen sensor -plug

It's right near the driver's side distributor clipped to the bracket for the
cruise control diaphram.  I believe the two reference sensors are clipped
there as well so be sure you get the right one.  ;-)

Ed


On 2/23/06, John Dodd <john.dodd at sait.ca> wrote:
>
> Hi
> I'd like to disconnect the OXsensor to see if the car runs any
> different.
> Is there a place under the hood for this or it's all under the car ?
> thanks