[V8] ECU codes/poor running-idle

[Tony and Lillie]

The intake air temp sensor is right next to the idle stabilizer valve on the 
front of the engine. It has two wires running to it. As you are looking at 
it, it is just to the left of the ISV.

Tony Hoffman
----- Original Message ----- 
From: "John Dodd" <jidodd at shaw.ca>
To: <v8 at audifans.com>
Sent: Wednesday, January 11, 2006 10:06 PM
Subject: [V8] ECU codes/poor running-idle


> Today I build myself a LED test setup and on my 1990 ,automatic , 3.6 l
> , I pulled the following codes:
> 2413
> 2322
> 1111
> I remember the 1111 showing up when the dealer tested it 2 years ago.ECU
> modified ,bad EPROM ?
> 2413 is only for the 4.2 l so what is going on ?
> 2322 inlet air temp sensor.BTW I have no idea where this sensor is
> located.
> Engine misses,idle goes down to 200 and up to normal again ,feels like
> driving a 7 cylinder car.
> Do you guys think that the symptoms match the code or is just some
> effect of another problem ?
>
> Thanks
>
>
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ... all 
> contributions welcome!