[V8] Fan and oil pump bearing Question!

[Kneale Brownson]

Well, I cleaned up my trifocals and took a magnifying glass to the bearing
(clean, new bearing from AudiConnection just like the one I used to replace my
oil pump bearing and now intended to replace the fan bearing when I get back at
this job), and the number is what I reported:  568350C  unless the "C" is a
second zero and wasn't stamped cleanly.


At 02:58 AM 1/15/2006 -0500, Pashamad at aol.com wrote: 
>
> In a message dated 1/14/2006 4:59:00 P.M. Pacific Standard Time,
> irautenberg at comcast.net writes:
>>
>> Yes,
>>
>> One of the foremost roller and ball bearing manufacturers in the world. 
>> Founded by Friedrich Fischer when he perfected the way to make perfectly 
>> round ball bearings by grinding in 1883.  The name is likely from when it 
>> became a stock company:   Fischer Aktien Gesellshaft, hence the FAG name. 
>> Was bought by the Schaeffler Group in 2001.
>>
>> Ingo
>>
>> ----- Original Message ----- 
>> From: "Kneale Brownson" <kneale at coslink.net> 
>> To: <Pashamad at aol.com>; <v8 at audifans.com> 
>> Sent: Saturday, January 14, 2006 6:11 PM 
>> Subject: Re: [V8] Fan and oil pump bearing Question!
>>
>>
>>
>> > Is FAG a mfgr?  # is  568350C 
>> > 
>> > 
>> > At 02:19 AM 1/14/2006 -0500, Pashamad at aol.com wrote: 
>> > >Hi to all! 
>> > >Do anybody knows exact manufacturer's name and number of these  bearings,
>> > >which are written on insert part of outer ring? 
>> > > 
>> > >Thanx, 
>> > >Pasha 
>> > > 
>> > >'92V8QA
>

Thanx, guys, for info, but FAG's search
<http://medias.ina.de/medias/en!hp.ec/Waelzlager_Gleitlager_Zubehoer*0;ayzZ7
pyMwf3b>http://medias.ina.de/medias/en!hp.ec/Waelzlager_Gleitlager_Zubehoer
*0;ayzZ7pyMwf3b shows nothing for this number. Maybe number was read
incorrectly
due to small size or rust (the reason I can't read on my bearing)?
 
Pasha