[V8] Engine Speed Sensor

[Jeremy Ward]

<In my best Ed McMahon voice> You are correct sir! Yes!!!

Thomas' photos are pretty good, but his write-up is in German:
http://www.audiv8.com/german/faq/faq_show.php?id=201 

Here is my write-up from a while back:
http://www.audifans.com/twiki/bin/view/Audi/RPMSensorNOSTART Thanks for the
upload Scott!

Bob, by the time you replace the 10th one on your 5th V8, you should have
this procedure down pat.  ;-)

HTH,

- Jeremy

-----Original Message-----
From: v8-bounces at audifans.com [mailto:v8-bounces at audifans.com] On Behalf Of
Kneale Brownson
Sent: Friday, January 20, 2006 4:57 PM
To: Kent McLean; bblake1055 at aol.com
Cc: v8 at audifans.com
Subject: Re: [V8] Engine Speed Sensor

Link goes to photo of the sensor connectors.  The  sensors themselves are
8-10 inches of wire lower down the engine.  Actually, I think the housing
for the sensors is part of the bellhousing.  They sense the flywheel, I
believe.