[V8] Broken ignition Switch

[Tony and Lillie]

There is a double connector right bihind where the washer tank sits. It sits 
in a clip. You will see it from under the car, just outside of the 
framerail. Right in front of the fender liner. It has two wires, a Black/Red 
and a small blue. Jumper the Black/Red, and you will be up and running. To 
kill it, I'd pull the three wire connectors on the each of the coils. Maybe 
a fuse you can pull, too.

Tony Hoffman

----- Original Message ----- 
From: <bblake1055 at aol.com>
To: <v8 at audifans.com>
Sent: Thursday, July 06, 2006 4:39 PM
Subject: [V8] Broken ignition Switch


> Help!
>
> My son's 1990 V8 is stuck in the Walmart parking lot with a broken 
> ignition switch.  It is stuck in the "on" position and won't turn off or 
> start.
>
> I am trying to jump the starter so I can at least get it home and figure 
> out what to do with it.
>
> Does anyone know which wires I need to jump to start the car.  There are 7 
> wires and I'm trying to figure which ones I need to jump.
>
> If it's easier I could jump it at the starter.
>
> I open for any suggestions.
>
>
> 5 AUDIS TOOOOOOOOO   MANY!!!!!!!!!!!!
>
>
> Bob Blake
>
> 90 V8
> 91 V8
> 92 V8
> 93 V8
> 93 V8 5 spd
>
>
>
> ________________________________________________________________________
> Check out AOL.com today. Breaking news, video search, pictures, email and 
> IM. All on demand. Always Free.
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ... all 
> contributions welcome!