[V8] Timing Belt

[quattro + 5 or 8 = fun]

Botzon's is 928-4747.

I saw Bud the owner on Thursday.  He has a V8 in there now that he is doing
some major repairs on.

Barry's as Greg said is also good.  Bud used to work with Barry.  They still
keep in contact and share resources.  So either shop is a good bet.

I think Bud is about $76 an hours.  I don't know how much Barry charges.
But, I imagine about the same.




Shayne


PARTING:  1972 Mercedes Benz 280 SE 4.5
PARTING:  1986 Audi 4000 CS quattro


> From: GregJ <gregsj2 at comcast.net>
> Date: Sat, 15 Jul 2006 11:54:57 -0700
> To: V8 <V8 at audifans.com>
> Cc: Jeremy Ward <jward at mti-interactive.com>
> Subject: [V8] Timing Belt
> 
> Rich,
> 
> Two places in the Spokane area for Audi repair.
> 
> Barry's Downtown Automotive Specialists  624-4106 - Spokane
> Botzen's Automotive - Spokane Valley   (don't have number handy but
> equally good).
> 
> HTH,
> 
> Greg J
> BIRA.ORG
> 
>> Rich Ehlert
>> Sent: Wednesday, July 12, 2006 4:53 PM
>> To: V8 at audifans.com
>> Subject: [V8] Timing belt.
>> 
>> Hi all,
>> It has been a couple of months since I had a problem develop.  In April,
>> I thought I had "slipped" the timing belt on the passengers side of the
>> '93.  Finally got to work on it, and it looks like the belt actually
>> slipped about 6 teerth. Apparently there was some interference, because
>> the last cylinder on the passangers side shows very low compression.  OK
>> S*&&.  So, I don't think I have the time to work on it.  It only took me
>> 3 months to get this far.  Does any one have a good Audi shop in the
>> Spokane WA area?  If I have to, I could trailer it somewhere else,
>> hopefully not too far.
>> Dang, I like the car.
>> Rich Ehlert
>> 120K just barely.
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ... all
> contributions welcome!