[V8] Coolant Temp Sensor Values (was New O2 Sensor- Whhhhaaaatt)

[Ingo Rautenberg]

Mike,

I don't have ETKA to confirm, but sounds right to me.  That rear  
(back of the head) sensor should be white, not black, btw.

Ingo

On Jul 19, 2006, at 8:26 AM, Michele_Deltergo at KeyBank.com wrote:

>
> Just called a vendor and they have the lower rad temp sender and  
> left front
> cyl head temp sender as identical parts 077 919 501 mentioned by Ingo.
> Can anyone else confirm?
> thx
> mike
>
>
>
> ********************************************************************** 
> *********
> This communication may contain privileged and/or confidential  
> information. It
> is intended solely for the use of the addressee. If you are not the  
> intended
> recipient, you are strictly prohibited from disclosing, copying,  
> distributing
> or using any of this information. If you received this  
> communication in error,
> please contact the sender immediately and destroy the material in  
> its entirety,
> whether electronic or hard copy. This communication may contain  
> nonpublic personal
> information about consumers subject to the restrictions of the
> Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or  
> redisclose
> such information for any purpose other than to provide the services  
> for which
> you are receiving the information.
>
> 127 Public Square, Cleveland, OH 44114
> ********************************************************************** 
> *********
>
>
> If you prefer not to receive future e-mail offers for products or  
> services from
> Key send an e-mail to DNERequests at key.com with 'No Promotional E- 
> mails' in the
> SUBJECT line.
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/ 
> listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ...  
> all contributions welcome!