[V8] TB Replacement

[Kneale Brownson]

Buy the "kit" from German Auto Connection.  Scroll down this page to see
the timing belt stuff and read their "warning" about not replacing all the
wear parts:  http://www.germanautoconnection.com/new_parts4sale.htm


At 09:41 AM 6/7/2006 -0700, Rich Ehlert wrote:
>Hi All,
>After about 2 months without my trusty V8, I am finally getting around 
>to changing the TB.  If you racall, it quit running at 120 K and all 
>indcations are that it slipped a tooth on the passanger side bank.  I 
>have good compression on the drivers side, but only +- 60 on the 
>passangers side.  That said, when I ordered the parts from Blau, they 
>couldn't? come up with the Friction pad, Oil pump pulley bearing, or 
>front oil pump pulley seal.  Any one have an idea of where I should 
>try?  And isn't there oil pulley bearing swap for less?  Seems I 
>remember reading that from someone a long while back.
>Thanks All,
>Rich Ehlert
>1993 V*Q
>
>_______________________________________________
>Audifans V8 mailing list
>Send posts to: mailto:V8 at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>Have an Audi V8 question?  Check the Audifans Knowledgebase!
>http://www.audifans.com/twiki/bin/view/Audi/V8
>Have a V8 answer? ... Please help others by adding to the KB ... all 
>contributions welcome!