[V8] Changing out Power Steering Hose

[Bob Tomkins]

All,

 

I pulled mine and had it rebuilt 3 weeks ago on my 92 V8.  I pulled the air
intake assembly on the drivers side, removed the heat shield and drained the
hydraulic tank.  I also replaced all the crimps on the tank with clamps at
the same time.

 

I removed nothing else.  I used a "19 mm flare nut crows foot" 3/8" wrench
with a long extension and a second 17mm with extension on the stationary
line to avoid to much torque on it.  Purchased the set of tools for $20.00
but could have gotten them cheaper on line if I wished to wait.  They are
good quality and a bargain!

 

Here is the Sunex set I bought
http://www.etoolcart.com/browseproducts/Metric-Crows-Foot-Wrench-Set--SUN971
0M.HTML .

 

The guys at Spokane had it out the day it arrived on Friday.  They mailed it
priority mail on Friday for $9.00 and I had it on Tuesday when I got off
work.

 

Bob

92V8Q

Suffolk, VA