[V8] Brake Cylinder Cap

[Ingo Rautenberg]

Yeah.  Keep it between 5-8 psi (preferably closer to 5 psi or .34  
bar).  Had a very messy experience with the clutch feed line popping  
off on the Urq a few months back.  VERY messy!

Ingo

On Nov 9, 2006, at 11:34 PM, urq wrote:

> ... I'd be careful not to use too much pressure anyway ... at some  
> point you
> might well have the reservoir popping off the master cylinder ...
>
> Steve B
> San Jose, CA (USA)
>
> ----- Original Message -----
>
>> My experience was the plastic cap from the junk yard popped off the
>> reservoir at 12 psig (assuming the gauge in my pressure bleeder is
>> accurate-- the flow at the bleeder screws wasn't huge).  I got a  
>> metal one
>> from a MAC truck, and it works great.  The tool guy said he has  
>> gotten
>> similar comments from techs at area German car dealers.
>
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/ 
> listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ...  
> all contributions welcome!