[V8] G40 Timing hall sensor error 2113 - slipped belt?

[Tony and Lillie]

This is exactly what code we got when the TB slipped on McKinney's V8. Pull 
the valve covers and check for huge clearance between the cam (intake, IIRC) 
and the top of the lifters.

Tony Hoffman

----- Original Message ----- 
From: "Jeremy Ward" <jward.v8 at gmail.com>
To: <v8 at audifans.com>
Sent: Sunday, October 08, 2006 9:30 AM
Subject: [V8] G40 Timing hall sensor error 2113 - slipped belt?


> Not my V8 fortunately.  :-)  Have any of you had error 2113 for G40 hall
> sensor?  A 'friend of ours' has swapped this sensor form another V8,
> verified wiring to the ECU *and* swapped ECUs - still no dice.
>
>
>
> Could his timing belt have slipped a gear or two?  What is the symptom 
> when
> this happens?  I know it is bent valves when several slip, but I think it
> has been said that you can drive the car (not very well) when it is off by
> one tooth.
>
>
>
> Thanks in advance,
>
>
>
> - Jeremy
>
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ... all 
> contributions welcome!