[V8] G40 Timing hall sensor error 2113 - slipped belt?

Ed Kellock ekellock at gmail.com
Mon Oct 9 11:05:04 EDT 2006


Jeremy, there is a code that will be registered when codes are pulled
without the engine running.  Not sure if this fits your scenario or not.

Ed

> -----Original Message-----
> From: v8-bounces at audifans.com 
> [mailto:v8-bounces at audifans.com] On Behalf Of Kneale Brownson
> Sent: Sunday, October 08, 2006 10:28 AM
> To: Jeremy Ward; v8 at audifans.com
> Subject: Re: [V8] G40 Timing hall sensor error 2113 - slipped belt?
> 
> 
> When I did the timing belt on our V8 #2 last fall, I couldn't 
> get TDC on #1 piston with the proper "mark" on the crank 
> pulley lined up, and I couldn't get the camshaft holder 
> plates installed either.  To get the plates installed, I had 
> to take off the cam covers and turn the engine until the
> marks on the cam gears themselves lined up properly.   After 
> I  removed the
> belt, I could turn the engine to TDC and get the mark on the 
> crank pulley aligned with the pointer.  So this car ran 60K 
> miles from the previous belt job (according to the records I 
> got with the car) with the timing off a fair amount.  Engine 
> seemed a lot more peppy when I drove the car after getting 
> the TB job done.  Then I blew off the lower radiator hose, 
> and now the waterpump makes a lot of rattling noises after 
> the engine warms up fully.  New pump on order.
> 
> 
> 
> At 07:30 AM 10/8/2006 -0700, Jeremy Ward wrote:
> >Not my V8 fortunately.  :-)  Have any of you had error 2113 for G40 
> >hall sensor?  A 'friend of ours' has swapped this sensor 
> form another 
> >V8, verified wiring to the ECU *and* swapped ECUs - still no dice.
> >
> > 
> >
> >Could his timing belt have slipped a gear or two?  What is 
> the symptom 
> >when this happens?  I know it is bent valves when several 
> slip, but I 
> >think it has been said that you can drive the car (not very 
> well) when 
> >it is off by one tooth.
> >
> > 
> 
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: 
> http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase! 
> http://www.audifans.com/twiki/bin/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB 
> ... all contributions welcome!
> 



More information about the V8 mailing list