[V8] Fender blinker R&R

[i.rautenberg at waratap.com]

Mike,

 From the outside, just like the other ones.  I use a small  
screwdriver (bigger than a jeweler's but smaller than your usual  
flat-bladed tool to assist in removal.

Ingo

Quoting Michele_Deltergo at KeyBank.com:

>
>
> I can usually get these out from the outside of the fender on my other Audi
> models.  The fit and finish on the V8 is a bit tighter tolerance.  Can
> these be lifted from the outside or do they need to be "released" from
> inside the fender?
> thx
> Mike
>
>
>
> *******************************************************************************
> This communication may contain privileged and/or confidential information. It
> is intended solely for the use of the addressee. If you are not the intended
> recipient, you are strictly prohibited from disclosing, copying, distributing
> or using any of this information. If you received this communication  
>  in error,
> please contact the sender immediately and destroy the material in   
> its entirety,
> whether electronic or hard copy. This communication may contain   
> nonpublic personal
> information about consumers subject to the restrictions of the
> Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or   
> redisclose
> such information for any purpose other than to provide the services for which
> you are receiving the information.
>
> 127 Public Square, Cleveland, OH 44114
> *******************************************************************************
>
>
> If you prefer not to receive future e-mail offers for products or   
> services from
> Key send an e-mail to DNERequests at key.com with 'No Promotional   
> E-mails' in the
> SUBJECT line.
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ... all  
>  contributions welcome!
>