[V8] power drop outs

[Michele_Deltergo at KeyBank.com]

I think I'll tackle this tonight as my 280 mile all hwy trip this weekend
with the new 02 only yielded 20 MPG.
Where will I find the block ground bundle?  Which direction is best
ingress/egress?  As the 02 bung is so full of crap etc,it wouldn't surprise
me at all if it is not the best of conductors at the moment. I think I'll
try a ring lug right around the 02 probe to the body and then run to the
common ground you mention.  I have a 600 miler tomorrow and anything over
20MPG will be well worth the effort.
Mike




BTW, if you wanted to create a pseudo 4-wire set up with the stock
sender you can run a dedicated ground wire from the ground lug on the
block and either a ring lug large enough to go around the OXS threads or
to a self tapping screw into the crossover assembly.  I'm thinking you
could drill a hole in the structure of the crossover that is not part of
the exhaust piping.  If I were to do this, I'd probably also use a star
washer between the ring lug and the self tapping screw to ensure a good
electrical connection.

Steve B





*******************************************************************************
This communication may contain privileged and/or confidential information. It
is intended solely for the use of the addressee. If you are not the intended
recipient, you are strictly prohibited from disclosing, copying, distributing
or using any of this information. If you received this communication in error,
please contact the sender immediately and destroy the material in its entirety,
whether electronic or hard copy. This communication may contain nonpublic personal
information about consumers subject to the restrictions of the 
Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose
such information for any purpose other than to provide the services for which
you are receiving the information.

127 Public Square, Cleveland, OH 44114
*******************************************************************************


If you prefer not to receive future e-mail offers for products or services from
Key send an e-mail to DNERequests at key.com with 'No Promotional E-mails' in the
SUBJECT line.