[V8] FW: track F/R and fun stuff.....:-)

[Coleman, David]

If this hasn't be addressed before, do you possibly have the one tie rod
installed upside down?  Not impossible to do.

-davec.
 

> -----Original Message-----
> From: v8-bounces at audifans.com 
> [mailto:v8-bounces at audifans.com] On Behalf Of Andrew Schlueter
> Sent: Wednesday, April 18, 2007 12:52 PM
> To: v8q
> Subject: [V8] FW: track F/R and fun stuff.....:-)
> 
> 
> When I swapped on my 200 20v suspension to the v8, I noticed 
> when I made left hand turns, I had some issues turning the 
> wheel that way. Remember when I told you guys how I broke my 
> distributor cap from hill starts pulling my avant...i was 
> wrong, the tie rod rubbed and broke the distributor cap. I am 
> running HR s6+ race springs with bilstein sports.
> The car goes in for an alignment on sat then off on a 100mile 
> cruise from our local audi/vw/porsche club. Before I go and 
> get aligned, I will pull the tierod and bend it so it will 
> clear the distributor. The drivers side has about no 
> clearance, the throttle cable has taken the brunt of the 
> force as a "buffer." Anyone else had this issue as well?
> 
> Andrew W. Schlueter
> '90 V8 MQuattro MSnS-E
> '90 Jetta VR6TT Quattro
> '91 200 VR6T Avant project
> www.hausofdub.com
> 
> 
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: 
> http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB 
> ... all contributions welcome!
> 

THE INFORMATION CONTAINED IN THIS MESSAGE AND ANY ATTACHMENT MAY BE PRIVILEGED, CONFIDENTIAL, PROPRIETARY OR OTHERWISE PROTECTED FROM DISCLOSURE. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, copying or use of this message and any attachment is strictly prohibited. If you have received this message in error, please notify us immediately by replying to the message and permanently delete it from your computer and destroy any printout thereof.