[V8] V8 Digest, Vol 46, Issue 7

[Sean cole]

Is there any interest in this?  I know there are tons of lowered cars and a
lot of different setup's, but I still can't see how super stiff springs will
beat having say a 32mm front with a 22-26mm Rear.

I'm talking to a few fabrications shop local to me as I lost access to the
shop I did a lot of my work at ~1.5 years ago.  If it is possible I might
build a few or if people show real interest I might do a GB.  I want bigger
bars as I'm into driving the car at the limit and after driving a 200 20vt
with a chip and now having a V8q soon to be making even more power I think I
can finally get the car to handle like I want not like a boat.

I need to do shocks as mine are getting a bit worn being as they are at
least 5 years old (look stock), so I figure It's time for a full on
rebuild.  I have an entire spare front sub frame and the 92 S4 rear
suspension so I think I can rebuild those over the next 2 months then late
September or early October  install every thing and get a nice handling car
right before winter,  I'd wait till spring, but the shocks need to be
replaced before then.

Sean


Message: 9
> Date: Mon, 6 Aug 2007 16:01:12 -0700 (PDT)
> From: S_Matus <scott_matus at yahoo.com>
> Subject: [V8]  Rear Sway Bars
> To: V8 <v8 at audifans.com>
> Message-ID: <39204.11499.qm at web33106.mail.mud.yahoo.com>
> Content-Type: text/plain; charset=iso-8859-1
>
>
> A few years back there was a 30mm bar available on the marketplace.  I
> called the guy to ask price.  He wanted $500 for the FSB.
>
> Needless to say it was out of my price range.
>
> Scott.
>
> --------- Original --------
>
> Message: 8
> Date: Mon, 6 Aug 2007 01:10:52 -0500
> From: "Sean cole" <v8coupe at gmail.com>
> Subject: Re: [V8] Rear Sway Bars
> To: "Ron Wainwright" <ron_01056 at yahoo.com>
> Cc: v8 at audifans.com, "Carol, Dave, and Zach Weiss"
> <cdzweiss at charter.net>
> Message-ID:
> <c44e6ed0708052310x169167b0n3a5470e649ed1cd0 at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> I want stiffer front as well.  I know It's not needed for a daily
> driver,
> but neither is a set of wild cams P&P'd heads, high compression,
> 6-speed
> convo, and daul 2.5" engine back exhaust.
>
> I think I might have figured out a way to do what I want that might
> make it
> reasonable for most on here.  I won't exactly spill the beans till I
> know it
> can be done.  I would like something like 30mm front with 28mm rear
> with the
> option of adjustment.  I also don't want
>
>
> ---------------------------------
> Ready for the edge of your seat? Check out tonight's top picks on Yahoo!
> TV.
>
> ------------------------------
>
> _______________________________________________
> Audifans V8 mailing list digest
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ... all
> contributions welcome!
>
> End of V8 Digest, Vol 46, Issue 7
> *********************************
>