[V8] Flaky ECU Communication

[Coleman, David]

I got water on my ECU when the gasket around the center wiper arm hole
wasn't secured.  I didn't see any trace of wetness until I pulled the
box down.

 

> -----Original Message-----
> From: v8-bounces at audifans.com 
> [mailto:v8-bounces at audifans.com] On Behalf Of Andrew Schlueter
> Sent: Tuesday, August 07, 2007 12:32 AM
> To: urq; v8 at audifans.com
> Subject: Re: [V8] Flaky ECU Communication
> 
> i have never had water that i was aware of. There is no 
> corrosion on any connection anywhere in the foot well. i have 
> not even tried the led test yet, ill give it a whirl.
> 
> the wiring and the connector are my issues, the semiconductor 
> is fine. i have too taken those in and out all the time when 
> i did my 5 speed swap.
> 
> Andrew W. Schlueter
> '90 V8 Quattro
> '90 Jetta Quattro
> www.hausofdub.com
> _
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: 
> http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB 
> ... all contributions welcome!
> 

THE INFORMATION CONTAINED IN THIS MESSAGE AND ANY ATTACHMENT MAY BE PRIVILEGED, CONFIDENTIAL, PROPRIETARY OR OTHERWISE PROTECTED FROM DISCLOSURE. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, copying or use of this message and any attachment is strictly prohibited. If you have received this message in error, please notify us immediately by replying to the message and permanently delete it from your computer and destroy any printout thereof.