No subject

find them right now... (something about it being after midnight)....

There are 2 speed numbers I remember...
1. Top speed 1990 w/ auto trans 157mph (electronic cutout)
2. When in (S)port mode, 3rd to 4th gear shift is at 124mph

I'll keep looking for the references tomorrow....

Maurice '90 Pearl (auto) w/192k (original trans)

-----Original Message-----
From: v8-bounces at audifans.com [mailto:v8-bounces at audifans.com] On Behalf Of
Ed Dekker
Sent: Friday, March 02, 2007 9:24 PM
To: Brian P.
Cc: v8 at audifans.com
Subject: Re: [V8] Top speed of a '90 V8Q

    I think I remember a yellow label near the ignition on a showroom '90V8 
dash that read,   "Due to tire limitation, DO NOT EXCEED 120 MPH".  Anyone 
else remember that?  There was no label on ours when we bought it 3 years 
later.
Ed

----- Original Message ----- 
From: "Brian P." <residentevil59 at hotmail.com>
To: <v8 at audifans.com>
Subject: [V8] Top speed of a '90 V8Q


> Hello. Anyone know the top speed of a '90 V8 Quattro? I've searched and
> searched with no result. Even the owner's manual shows nothing. I know the
> '91's top speed was around 150 mph, but weren't they electronically 
> governed
> and the '90s weren't? Any help appreciated!



----------------------------------------------------------------------------
----


> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ... all 
> contributions welcome!
> 


_______________________________________________
Audifans V8 mailing list
Send posts to: mailto:V8 at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
Have an Audi V8 question?  Check the Audifans Knowledgebase!
http://www.audifans.com/twiki/bin/view/Audi/V8
Have a V8 answer? ... Please help others by adding to the KB ... all
contributions welcome!