[V8] (no subject)

[cobram at juno.com]

tlastre01 at sprintpcs.com writes:
> I tried fixing or should I say reattaching my door molding. It looked 
> like it was loose from the bottom. It turns out there's a bow in the 
> molding so if I glue from the bottom it comes off from the top when 
> I press on top it comes off from the bottom. Does any body out there 
> have a bowless, straight driver's door molding they want to sell 
> me?
> Ron, I know you probably do.
> Thank You Very Much!
> Tomas

If it's the hard rubber/plastic molding, it can be straightened out
enough to stay on if you take a heat gun to it.  Don't try and hurry it,
make sure it heats evenly.  Bending it in the opposite direction once or
twice is usually enough.  BTDT. 
 
BCNU,
http://www.geocities.com/cobramsri/
We come into the world naked, screaming and covered in blood. Why should
the fun end there?