[V8] Portland man goes balistic...

[Jeremy Ward]

Thanks Scott.  I found Scott Matus's email form 3/8.  For $2.89 I will give
it a shot! ;-)

-----Original Message-----
From: v8-bounces at audifans.com [mailto:v8-bounces at audifans.com] On Behalf Of
Scott Phillips
Sent: Wednesday, March 14, 2007 8:17 PM
To: v8 at audifans.com
Subject: Re: [V8] Portland man goes balistic...

There are a couple of things, if you can buy or have access to a lighted
bore scope, you can scope out the cylinder to see if there is anything
down there and you can inspect the condition of the cylinder wall. It'll
give you the information your looking for.

Other than that instead of using compressed air, use a vacuum. And
something like a straw that will flex but not collapse. To pull any of
the remnants up.

There were some posts on the q list, (or here I can't remember anymore)
like a week ago that NAPA has the o-ring kits for like 5 bucks. (two
req'd per rail). 

As to sourcing another 3.6, on that coast on AudiWorld..DaveinSaltLake
has a line on a whole car, that I recall him being able to get for like
$500 (Police Impound), I don't know but on the east side, Chris at Force
5 had a couple at last check for somewhere about that $ range. 

Also a "new bosch injector, is $50.00 on ebay right now.

HTH..

Scott
_______________________________________________
Audifans V8 mailing list
Send posts to: mailto:V8 at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
Have an Audi V8 question?  Check the Audifans Knowledgebase!
http://www.audifans.com/twiki/bin/view/Audi/V8
Have a V8 answer? ... Please help others by adding to the KB ... all
contributions welcome!