[V8] V8q stolen

[d saad]

Ironic!

I finally got my motor running last night, and on the
first attempt to start it, I got a gasoline geyser. probably a good thing
really since it got the fuel rails primed quickly. (and I didn't burn down
the house) I fixed that and she fired right up but was running real rough
and would not idle. I just figured it was birthing pangs and it would
settle down - then I noticed one of the coils was unplugged. Fixed that
and it runs pretty good - but it still seems to miss a little. The plugs
are old, so I am going to try some new NGKs to see if that helps.

So far, it has been pretty smooth - except that somehow one of the acorn
nuts on the front right cam bearing cap got left off - meaning I had to
remove the timing belt to replace it. 

I still need to get the
bumper back on, and replace all the broken piping for the windshield
washers, and get the front end aligned but I am CLOSE!!

Dave


> Anybody else see this
> 
>
http://www.twincities.com/ci_5818870?source=rss
> 
> 
> 1987 5000
> 1990 V8Q
> 1998 A4Q 2.8
> 1999
A6Q 2.8
> 2000 4 Motion
>
_______________________________________________
> Audifans V8
mailing list
> Send posts to: mailto:V8 at audifans.com
>
Manage your list connection:
http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8
question?  Check the Audifans Knowledgebase!
>
http://www.audifans.com/twiki/bin/view/Audi/V8
> Have a V8 answer?
... Please help others by adding to the KB ... all
> contributions
welcome!
>