[V8] Turbo-ing the V8

[Enzeder]

The bore on the 3.6, 2.7 and 2.2 are all the same aren't 
they?  81.0mm.  And I think the stroke is the same @ 86.4mm.  Would 
it be possible to use pistons from one of these cars to lower compression?


At 12:41 PM 5/11/2007, Tony and Lillie wrote:
>That was my original thought. However, I'd run some bigger turbos (like
>T4's) just for the simple fact of slow boost buildup. Detonation is much
>less likely to occur at higher RPM. so I'd go for about 4psi at 3000 and up
>on an otherwise stock engine.
>
>Just my $.02 though, never done it
>Tony Hoffman
>
>----- Original Message -----
>Sent: Friday, May 11, 2007 10:39 AM
>Subject: Re: [V8] Turbo's For Sale!
>
>
> > Not for a n/a moter there not. You only want to run about 6-8psi on a  n/a
> > motor, unless you plan on opening it up to stack head gaskets
>
>_______________________________________________
>Audifans V8 mailing list
>Send posts to: mailto:V8 at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>Have an Audi V8 question?  Check the Audifans Knowledgebase!
>http://www.audifans.com/twiki/bin/view/Audi/V8
>Have a V8 answer? ... Please help others by adding to the KB ... all 
>contributions welcome!