[V8] Heater Vent Bulb Change Write Up?

[d saad]

I think all you have to do is pull out the vent, and then pull out the
bulb with some needle nose pliers. Then clean up the mess of broken glass
where you smashed the bulb with the needle nose pliers.

You
might try putting some tape or something on the plier tips to make them
grab the glass a little better.


Dave

> ...
so, I find that two of the 3 dash vents are not illuminated ... pull
> the
> middle one ... seems I have to disassemble some parts
which were not
> intended to be disassembled to get to the bulb. 
I thought I saw a write
> up
> on how to change the bulbs
... didn't see it in the KB.  Does anyone
> remember where this
procedure can be found?
> 
> Thanks Kneale for the P/N for
the gasket ... sometimes I make things too
> difficult for myself
... what did I say?  ALWAYS I make things difficult
> for
> myself!  :-)
> 
> Steve B
> San Jose, CA
(USA)
> 
> -----Original Message-----
> 
>
Ah, yes, one thing I want to check tonight is the illumination of the
HVAC
> vents ... tried this before, but it won't work without the
instrument
> cluster installed!
> 
> 
>
_______________________________________________
> Audifans V8
mailing list
> Send posts to: mailto:V8 at audifans.com
>
Manage your list connection:
http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8
question?  Check the Audifans Knowledgebase!
>
http://www.audifans.com/twiki/bin/view/Audi/V8
> Have a V8 answer?
... Please help others by adding to the KB ... all
> contributions
welcome!
>