[V8] Timing Belt Change...wish me luck.

[Ron Wainwright]

--- NicolCS at aol.com wrote:

>  
> In a message dated 5/14/2007 9:36:44 A.M. Pacific
> Standard Time,  
> tonyandlillie1 at earthlink.net writes:
> 
> I'll add  a third to that. As I said, it is
> possible. However, nothing broke 
> on me,  and I still would never do the job with the
> front end on. But, to 
> each  their own...........
> 
> Tony Hoffman
> 
> 
> As long as we are on the topic... I'm getting ready
> for this job myself and  
> I noted a couple of weeks ago that someone said that
> there is a large "Costal" 
>  connector in the harness that simplifies the
> removal of the front end.  I  
> looked around the LF fender area and the LF fender
> where it meets the core  
> support and didn't see any large electrical
> disconnect in the harness.  Did  I 
> miss it?  Do all the V8s have the disconnect?
>  
> TIA. Craig Nicol
> 90 V8 97k
> 95 S6 Avant
> 
> 
 Craig, the "Coastal" connector is on the pass side
frame rail..just before the front mount.
 Be carefull pulling the 2 halfes apart. The plastic
is very brittle.

 Ron



 
____________________________________________________________________________________
No need to miss a message. Get email on-the-go 
with Yahoo! Mail for Mobile. Get started.
http://mobile.yahoo.com/mail