[V8] Fuel Line Replacement

[Fred Munro]

Kneale;

The hard pipe fuel lines on the UrS are 8mm; I imagine yours are the same.
This is close enough to 5/16" line as to make no difference (OK, OK, it's
0.002" larger). When I replaced the fuel lines on my '94 S4 I cut the old
pipes out leaving 6" at each end to retain the OEM connections and spliced
in 5/16" galvanized tubing using 5/16" compression fittings.
For the '97 S6, I've purchased some 5/16" Nylon 11 fuel line and will splice
it in using 5/16" nylon to metal compression fittings.

Fred Munro
'97 S6


-----Original Message-----
From: quattro-bounces at audifans.com
[mailto:quattro-bounces at audifans.com]On Behalf Of Kneale Brownson
Sent: May 19, 2007 3:36 PM
To: 200q20v at audifans.com; quattro at audifans.com; v8 at audifans.com
Subject: Fuel Line Replacement


I want to replace the fuel lines on my 200q20v.  Already used the
high-pressure injection hose type patch.  Now I want to do a "real"
replacement with a good hard line.  I can't seem to find a source for
stainless or for the OEM "nonrust" types in metric sizes.  Anyone done this?
Got sources?  Suggestions?
_______________________________________________
quattro mailing list
quattro at audifans.com
http://www.audifans.com/mailman/listinfo/quattro
---
Watch this space for ads :)