[V8] Alignment specs

[Michele_Deltergo at KeyBank.com]

I did many new front suspension (and rear) pieces so an alignment was in
order.  1,000 miles later I'm really wearing my front tires on the inner
edges.  Neg camber problem.   Car goes down the road straight with no pulls
what so ever.  I pull out the alignment measurements on the print out and
all seem in spec.   Then I look at the Car model and it says 90 Quattro!
They aligned the V8 on 90 specs.  Interestingly only one front is
'technically' out of proper spec (and the 2 rears slightly) and the other
front just in, but even it is noticeably worn.  Tires and rims are stock.
Does any one have a preferred alignment spec other than in the middle of
the specified ranges for the V8?
thx
Mike



*******************************************************************************
This communication may contain privileged and/or confidential information. It
is intended solely for the use of the addressee. If you are not the intended
recipient, you are strictly prohibited from disclosing, copying, distributing
or using any of this information. If you received this communication in error,
please contact the sender immediately and destroy the material in its entirety,
whether electronic or hard copy. This communication may contain nonpublic personal
information about consumers subject to the restrictions of the 
Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose
such information for any purpose other than to provide the services for which
you are receiving the information.

127 Public Square, Cleveland, OH 44114
*******************************************************************************


If you prefer not to receive future e-mail offers for products or services from
Key send an e-mail to DNERequests at key.com with 'No Promotional E-mails' in the
SUBJECT line.