[V8] Alignment specs
Ed Kellock
ekellock at gmail.com
Tue May 22 14:41:17 EDT 2007
That reminds me, I get to take my car back for rebalancing of the
front tires. Yea.
On 5/22/07, Andrew Schlueter <andyschlueter at 4techwork.com> wrote:
> I do all my own tire mounting, and then take them to goodyear to balance
> them, much cheaper that way.
>
> Andrew W. Schlueter
> '90 V8 MQuattro
> '90 Jetta VR6TTQ
> '87 4000cs
> www.hausofdub.com
>
>
> -----Original Message-----
> From: v8-bounces at audifans.com [mailto:v8-bounces at audifans.com] On Behalf
> Of Coleman, David
> Sent: Tuesday, May 22, 2007 1:09 PM
> To: Kneale Brownson; Ed Kellock
> Cc: v8 at audifans.com
> Subject: Re: [V8] Alignment specs
>
> Well since I also don't have an alignment rack, and will sooner have my
> tires wear out prematurally than have the local grunts completely eff-up
> my car.... not to mention having other cars that are submitted to my
> wife's less-than-stellar driving prowess.... I find myself on tirerack's
> website more often than most folks. And it'd sure be nice (and
> inexpensive) to just mount/balance the new boots my dang self, right
> where UPS drops them off!
>
> Oh, and then there's the race car, the trailer, the neighbor's XK120,
> the other neighbor's off-road toys, etc...
>
>
>
>
> ________________________________
>
> From: Kneale Brownson [mailto:knealeski at sbcglobal.net]
> Sent: Tuesday, May 22, 2007 12:55 PM
> To: Ed Kellock; Coleman, David
> Cc: v8 at audifans.com
> Subject: Re: [V8] Alignment specs
>
>
> Doesn't everyone have a hoist? HeHe. I waited years to get to
> where I could manage that purchase, of course.
>
> But why would you need a tire machine if you have spare wheels
> and tires? Or is it too much work to switch? Before hoist, I did it in
> the driveway on jackstands for quite a while.
>
> Ed Kellock <ekellock at gmail.com> wrote:
>
> Well, at the time I wasn't concerned at all really, as
> it looked like
> they hit the jack points okay, though the cups on those
> jacks were
> quite large, like coffee cup saucers so I wondered if
> they were
> hitting anything besides the jack point, but
> ultimately... well, let's
> put it this way, I haven't even been bothered enough
> about it to go
> inspect it.
>
> It was just funny to see it in the air like that and
> when I read about
> the other Dave's concern about having anyone touch his
> car, I
> identified with that and it reminded me of the tire
> experience,
> because I was wondering the whole time how much expense
> and trouble it
> would be to have my own tire machine.
>
> Where the heck I'd put it is a whole 'nother deal. As it
> is, I have
> stacks of bagged tires/wheels in the corners of my
> living room with
> Indian... er Native American blankets thrown over them,
> serving quite
> nicely as cat condos.
>
>
>
> THE INFORMATION CONTAINED IN THIS MESSAGE AND ANY ATTACHMENT MAY BE
> PRIVILEGED, CONFIDENTIAL, PROPRIETARY OR OTHERWISE PROTECTED FROM
> DISCLOSURE. If the reader of this message is not the intended recipient,
> you are hereby notified that any dissemination, distribution, copying or
> use of this message and any attachment is strictly prohibited. If you
> have received this message in error, please notify us immediately by
> replying to the message and permanently delete it from your computer and
> destroy any printout thereof.
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question? Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ... all
> contributions welcome!
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question? Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ... all contributions welcome!
>
More information about the V8
mailing list