[V8] Headlight question

[Tony and Lillie]

> To fake out the system, you either need to fool it into thinking the
> current draw is in range (not easy), or disable the warning (probably
> easy).  I don't know what the wiring mod does, but I suspect it
> simply removes the signal wire to the autocheck display - right?
>

The wiring mod I did is to simply bypass the relay altogether. I jumpered 
the power from the supply to the feed circuit. Can't remember what the 
terminals I did it with, but I can look and take pics if anyone wants. I can 
also look at the schematics if need be.

However, using two relays for the low beam circuit or bending pin "K" over 
are just as good, IMHO. I didn't know about the two relay thing, or that's 
probably what I would have done. It would have made one other thing easier. 
That is, my relays sit on the passenger side in a plastic bos, and I have a 
wire that runs all the way across in front, to the drivers headlight. So, 
whenever I have to remove the front end (quite often, it seems), I have to 
cut all the little zip ties for the wire. There are probably 10.

Tony Hoffman