[V8] More v8 Eurolight install

[qshipq at aol.com]

Ok the Euro lights are in and working.? I used the plugs and reused the terminals from the Mercedes 190 rear light harness and fit 4 12ga wires into the plug (1 for the low position, 1 for the high position 2 wires for grounds) and used a 16guage wire for the parkings, and all 5 crammed in there with not much room to spare.? 1 40amp relay for the low beam pair and 1 40amp relay for the 4 high beams.? 

BTW, the plug terminals clean
out really easily, I heated them up with a butane soldering iron,
pulled the wires out then dropped the hot terminal on the bench, the
rest of the solder just splatters out.? Gotta like that!

Since I'm not sure this car is a keeper, I tapped into the PS low and high beam wires for my relay activations.? Problem now is I have the bulb check light from the missing DS connection.? IIRC, there is a workaround fix for this in the thread I was looking for yesterday....? Can anyone help on this?

Thanks in advance

Scott J
92 v8 Abt chip and eurolights