[V8] ABH using lots of fuel!

[Bastian Preindl]

hi Ron,

when checking the actuators as the magnet switched injection valves are 
you can only proove if they open on command or not. If one won't, the 
engine wouldn't run smooth. But you can't proove if there are other 
problems with the valves. I also can't see which problems could cause 
the injection of more fuel; except one valve is open all the time. A 
readout of the ECU fault memory is always a good point to start with.

Bastian

Ron Wainwright schrieb:
> Have you pulled codes? & confurmed the inj are
> working/spraying as they should? You can check the inj
> by doing the diagnostic system checks.
>
>  Ron
>