[V8] MAF Cleaning

[32VQUATTRO]

They still fowl out, despite this burn off feature. Best to clean the IAT 
sensor as well with CRC's maf cleaner.
----- Original Message ----- 
From: "Kneale Brownson" <knealeski at sbcglobal.net>
To: "S_Matus" <scott_matus at yahoo.com>; "V8" <v8 at audifans.com>
Sent: Monday, June 16, 2008 12:08 PM
Subject: Re: [V8] MAF Cleaning


> Scott Mockry says the MAF should be self-cleaning through the wire getting 
> something like 1000 degrees of heat at each shutdown of the engine. 
> Trouble with the MAF if shown by reading the codes, most often is 
> associated with the wiring to the device rather than the device itself.  I 
> wouldn't try "cleaning" myself until I'd determined everything else is OK 
> with that device.
>
> S_Matus <scott_matus at yahoo.com> wrote:  I'm troubleshooting my failed 
> emissions. I have already replaced my OX and think the MAF may be dirty.
>
> What are the best methods and Cleaners to use?
>
> If there is a write up in the KB please send me the link.
>
> Thanks guys,
> Scott
> '90 V8Q
> '91 V8QM
> '03 RS6
> '02 A6 2.7T
> '07 GTI 6-sp
>
>
>
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>
> You can help keep the audifans site running by shopping at 
> http://audifans.com/shop/
>
>
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>
> You can help keep the audifans site running by shopping at 
> http://audifans.com/shop/
>