[V8] sanity check, what, from a V8Q owner?
Bastian Preindl
bastian at preindl.net
Tue Mar 18 09:08:32 PDT 2008
Hi Steve,
I know the flywheel sensor is always there, but there are other errors
also which can happen, like "intermittend" concerning the flywheel
sensor. It's worth a look, also exchanging flywheel sensor and ignition
point sensor, as they are identical but have different functions. But
that's a horrible task ;)
It could also be the Hall sensor... you never know. But if the fuel pump
works and there is still no fuel coming, it's usually 'cause the ECU
says "no no" :)
regards
Bastian
urq schrieb:
> ... the ECU fault memory can be a bit confusing on a no start situation ...
> it will tell you the flywheel sensors are bad when they are OK. Usually I'm
> one of the first people to tell folks to read codes ... but in a situation
> like this the codes are probably not the best place to start.
>
> That said, if you haven't read them go ahead and do so ... it will allow you
> to see any other faults the engine is showing and clear them ...
>
> Steve B
> San José, CA (USA
>
More information about the V8
mailing list