[V8] v8 e brake adjustment

[urq]

Be careful about changing the setting of the cable adjustment ... you may
end up reducing the amount of braking you can get from the e-brake.  Make
sure all the cables are free.  I believe the adjustment is done by measuring
the location of the yoke on the threaded rod ... 

Steve B
San José, CA (USA)

-----Original Message-----

The adjuster for the e-brake is located near the
center support bearing.
 I just redid both my e-brake cable yesterday...& let
me tell you it is a true PITA!!!! But,
the adjuster nut is 10 or 11mm.

 Ron

--- cny86400 at centurytel.net wrote:

> Hi All,
> 
> I redid the rear brake on my 91 v8 - now the ebake
> is so tight I can not even
> get on of the calibers on! How do I adjust the
> ebrake? I'm trying to find an
> adjuster but can not locate one! My cable are free
> and moving(that was good
> news). 
> 
> 
> Thanks for your help,
> Greg