[V8] Engine Trim -- Powder Coat

[Ron Wainwright]

Scott, is the Black Glossy, or flat? I'd be interested
in doing some pieces. & I'm not interested in wrinkle
type paint.
 I'd want,
both valve covers, AC/PS bracket, cam covers, & both
t-belt covers done.
 
 Shoot me a mail to discuss cost ect......

 Ron

--- S_Matus <scott_matus at yahoo.com> wrote:

> Lanier - 
> 
> I'll Powdercoat your covers for $45.00 plus S&H to
> your zip. Bolts are extra cost.  My shop I use in
> Denver (He has the really BIG oven) has a $65
> minimum coating price and a $25 charge per piece,
> unless you have a batch of the same items, then it
> is a per Job Price.
> 
> I have Silver, Black, White, John Deere Yellow &
> Green, Blue, Grey and Red. (I think I have some
> Chrome powder too) This is a low temp polyester
> coating should be good for 225 degrees. It typically
> cures at 400 degrees. The lighter colors may yellow
> slightly after repeated heat cycling.  Other colors
> would be a wait for the order arrival.
> 
> I will media blast the covers, thorough cleaning,
> Pre-heat, coat and then Bake them for 8-12 minutes.
> 
> Anyone else is open to the same offer.
> 
> Scott
> '90 V8Q
> '91 V8QM
> 
> 
> ---------Original Message --------
> 
> Message: 8
> Date: Fri, 23 May 2008 20:54:39 -0500
> From: Lanier Pratt <lanierpratt at mac.com>
> Subject: Re: [V8] Engine Trim -- end result
> To: V8 Audi Fans <v8 at audifans.com>
> Message-ID:
> <01EA39A0-6183-440D-BC66-6A2B1628F3BD at mac.com>
> Content-Type: text/plain;    charset=US-ASCII;   
> delsp=yes;    format=flowed
> 
> How much did your local shop charge you for the
> powder coating?  They  
> look great.
> 
> 
> Lanier Pratt
> '92 V8Q 4.2L
> '90 V8Q 3.6L
> 
> 
> 
>       
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection:
> http://www.audifans.com/mailman/listinfo/v8
> 
> You can help keep the audifans site running by
> shopping at http://audifans.com/shop/
> 
>