[V8] Euro Lights adjusted way too high

[32VQUATTRO]

Wow.....may the gods have mercy on you for comparing your Audi to a Toyota 
= (
----- Original Message ----- 
From: "Mark Kalbskopf" <gbmarc at cox.net>
To: <v8 at audifans.com>
Sent: Wednesday, September 03, 2008 7:13 PM
Subject: Re: [V8] Euro Lights adjusted way too high


> Well, thanks for the input guys.
> I didn't want to hear the bit about "remove the headlights" though.
> What a stupid idea, to have to remove the bumper first.
> Anyway . . .
>
> I did a little poking around in the back of the lamp.
> The adjuster turns nicely, the wire turns inside, the plastic rack
> and pinion turns great, the bolt in the plastic shaft is shiny and
> new and rotates away, but ALAS, it looks like the plastic shaft isn't
> really connected to the lamp bezel!
> So I tried tilting the lamp bezel, and sure enough I could rock it up
> and down.
> Unfortunately, because it's too deep inside,  I can't see how the
> connection is made or why it is disconnected.
> Why on earth should it come apart anyway?
>
> Sigh . . . .
>
> I wonder if Toyotas have this problem.
>
> Maybe I should sell it. "V8 Quattro, cheap. Best driven during
> daylight hours."
>
> Mark.
>
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>
> You can help keep the audifans site running by shopping at 
> http://audifans.com/shop/
>