[V8] engine cleaning

[Ingo Rautenberg]

Be especially wary of the connector at the front of the engine underneath
the idle stabilizer -- the one that plugs into the throttle position
switch.  Water gets in there and you'll know right away!

-Ingo

On Tue, Sep 30, 2008 at 11:26 PM, Tony and Lillie <
tonyandlillie1 at earthlink.net> wrote:

> Same thing on the V8. Also, don't get too carried away around the
> connectors
> either. High pressure water can get into the harness sheath, follow it to
> the ECU. Then, you have problems. So, basically, don't go really close to
> where the wiring ends are. Other than that, clean away!
>
> Tony
>
> ----- Original Message -----
> (for example in the Corrado the
> > distributor cap is notorious for allowing water inside when cleaning the
> > engine).
> >
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>
> You can help keep the audifans site running by shopping at
> http://audifans.com/shop/
>
>