[V8] Bearing puller

[Tony and Lillie]

Jack,

I have one of the Harbor freight pullers. I love it, we've done four or five 
bearings with it already. It's well built, and I don't see any reason to buy 
a more expensive one. However, it doesn't come with a provision for pulling 
the hub itself from the bearing. So, The first one we did was with some 2X4 
peices and whatnot. However, since then, we made a plate for it with a piece 
of 1/2" steel.

Tony


----- Original Message ----- 
Subject: [V8] Bearing puller


> Anyone have any -real- experience with their unit?? Not just hearsay.
> I know the "real" Hub-Sharks work well as I used to use them at the Garage 
> I
> worked at years ago. I really can't spring for the 400 large for one 
> thought,
> as that would be half the cost of the Quaife diff I'm saving for.
> The 70 dollar cost of the Harbor Freight is doable though...but, if it is 
> a
> total POS then off to the local machine shop and another 30 bucks.
> Let me know and TIA!
> -Jack