[V8] V8 Digest, Vol 66, Issue 16

[Shin Hoshikawa]

I'm not sure using stock V8 springs on your 20vt is a good choice to lower
the car.   I do have a 91 200 20V Sedan with lowering springs for V8.   The
effect of the lowering is rather interesting because the set was designed
for heavier cars, so I assume.  The end results -  the car does not look
like it's been lowered to unsuspecting eyes, but when you get in or out of
the car, you do feel the difference - it is much lower than normal.   How do
I know?   Because I have another one with stock springs to compare.  Every
time I get out of my car with V8 springs, I feel the ground is much much
closer.  In fact, I like the lowering effect for my daily driving.  Of
course, for all-out track applications, it may not be low enough or stiff
enough.  By the way, this was done by a previous owner, probably about 10+
years ago.  I own this car for about 7 years.  Shin

Message: 3
Date: Tue, 14 Apr 2009 10:13:49 -0700 (PDT)
From: Ron Wainwright <ron_01056 at yahoo.com>
Subject: [V8] Need lowering springs
To: v8 at audifans.com
Message-ID: <957429.28709.qm at web65501.mail.ac4.yahoo.com>
Content-Type: text/plain; charset=us-ascii


As subject states. There for my 20vt. I thought I seen someone say they had
a used set they pulled off there V8's?

Shoot me a mail off list please.

 Ron